Your configuration
Updates with your selection in “Configure & add to quote”
- Power
- 40 W
- CCT
- 2700 K
- Beam angle
- 120°
- Diameter
- 10.4 m
- Illuminance
- 212 lux
Commercial
CL PL 12
In stockTwo-thirds of an inch, driver included
LED panel just 0.68" thick with an integrated driver, bolting straight onto
Certifications
Does your project require another standard? We build to your specification.
Photometric data (IES/LDT) and datasheet available on request: we send them in under 24 h. Or write to us by email →
Design your space with the photometric studyBetaCheck that your project meets the norm: free, in minutes.Your configuration
Updates with your selection in “Configure & add to quote”
- Power
- 40 W
- CCT
- 2700 K
- Beam angle
- 120°
- Diameter
- 10.4 m
- Illuminance
- 212 lux
Configure & add to quote
Power
Pick the SKU; the highlighted wattage is the default.
Light color
We manufacture any colour temperature. If the one your project needs isn't listed, ask for it and we'll build it.
Mounting
Other / extra requirement
Quantity
- 0.68" thick with the driver inside: the thinnest in the catalog
- Mounts on a standard junction box, with no special hardware
- Three mountings with the same piece: surface, recessed or suspended
- Adapts on site: three wattages and three color temperatures without replacing the fixture
- Up to 110 lm/W and 5,500 lumens
- THD < 20 % and power factor > 0.9
- 87.8 % of output at 50,000 h under LM-80: measured depreciation
- 120-minute emergency mode with 1,760 lumens
- cULus damp and 5-year warranty
Specifications
Electrical specifications
- Input voltage
- 100 – 277 V CA
- Wattage
- Three selectable steps depending on size (see table)
- Dimming
- 0-10 V, continuous down to 10 %
- Driver
- Integrated; this is what allows the 0.68" thickness
- THD
- < 20 %
- Power factor
- 0.9
- Tested dimmers
- Lutron® Diva-Dvtv · Leviton® IP-710-DL
- Emergency
- Optional: high-voltage 16 W emergency driver with 120 minutes of runtime and automatic return to charging when power is restored. Delivers 1,760 lm in emergency mode
Photometric specifications
- Output
- 2,200 – 5,500 lm depending on size and step
- Efficacy
- 110 lm/W
- CRI / Ra
- Ra 80
- CCT
- 3000–4000 K
- Optics
- Flat diffuser with uniform emission
Physical, materials & mounting
- Thickness
- 0.68": the defining figure of this piece
- Sizes
- 2' × 2' · 1' × 4' · 2' × 4'
- Construction
- Extruded aluminum profile that also works as a heat sink
- Mounting
- Surface, recessed or suspended
- Junction box
- Slotted design, compatible with 3" octagonal, 4" octagonal, 4" round and 4" square boxes, all 2-1/8" deep
- Surface mount
- Metal plate with holes to screw to the ceiling and four fixed corner hooks
Protection & lifetime
- Location
- Damp locations
- Lifetime
- 50,000 h
- Warranty
- 5 years
- Thermal management
- Aluminum frame acting as a heat sink
Configurations / SKUs
| SKU | Size | Actual dimension | Selectable wattages | Output | Efficacy |
|---|---|---|---|---|---|
| CL-PL12-2X2★ | 2' × 2' | 23.70" × 23.70" × 0.68" | 20–40 W | 2,200 / 3,300 / 4,400 lm | 110 lm/W |
| CL-PL12-1X4 | 1' × 4' | 47.70" × 11.70" × 0.68" | 20–40 W | 2,200 / 3,300 / 4,400 lm | 110 lm/W |
| CL-PL12-2X4★ | 2' × 4' | 47.70" × 23.70" × 0.68" | 30–50 W | 3,300 / 4,400 / 5,500 lm | 110 lm/W |
Swipe the table to see all columns →
Similar products
Same family
Complete your project
Often specified together
