Illustrative image: shows a model from the same line. The dimensions and specs on this page are this model's.

Your configuration

Updates with your selection in “Configure & add to quote”

Power: 60 W
CCT: 2700 K
Beam angle: 120°
Diameter: 10.4 m
Illuminance: 318 lux

Interior, recessed panelØ and illuminance calculated at 3 m

Commercial

CL PL 10 B

Name: CL PL 10 B
Brand: Carden Lighting
SKU: CL-PL10B-1X4-50W-3CCT

Power30 – 70 W

Efficacy125 – 150 lm/W

FluxMeasured · 1×4: 4,100 – 6,876 lm…

CCT4000 – 6000 K

CRIRa 80

Certifications

NOMFCC

Does your project require another standard? We build to your specification.

Request a quote Request data sheet Request IES files

5-year warrantyResponse in under 24 h

Photometric data (IES/LDT) and datasheet available on request: we send them in under 24 h. Or write to us by email →

Design your space with the photometric studyBetaCheck that your project meets the norm: free, in minutes.

Your configuration

Updates with your selection in “Configure & add to quote”

Power: 60 W
CCT: 2700 K
Beam angle: 120°
Diameter: 10.4 m
Illuminance: 318 lux

Interior, recessed panelØ and illuminance calculated at 3 m

Configure & add to quote

Power

//W

Pick the SKU; the highlighted wattage is the default.

Light color

We manufacture any colour temperature. If the one your project needs isn't listed, ask for it and we'll build it.

Mounting

Other / extra requirement

Quantity

Where it's used

Offices and corporate: the back-lit panel provides an even luminous surface without the dotting of edge-lit panels, which is noticeable on low ceilings.Hospitals, clinics and doctor's offices: 4000 K in circulation areas and 5000 K in exam areas, with the same panel and no change of model.Schools and classrooms: on-site wattage adjustment tunes the level per room without replacing equipment.Retail and big-box: the 2×4 format covers a large area with few fixtures.Replacing an existing ceiling fixture: the old fixture comes out and the panel goes into the same opening.When to choose the 10: when you need 2×2 ft, 5 color temperatures, 5 wattage steps or PF > 0.95.When to choose the 10 B: when 3 CCTs and 3 steps in 1×4 or 2×4 are enough, and price or lead time drives the decision.

Specifications

Electrical specifications

Wattage: 30–70 W
Input voltage: 120-277 V AC · flicker-free
Dimming: 0-10 V · control wiring: DIM+ purple · DIM− pink
Surge protection: 2 kV
Frequency: 50/60 Hz
Driver: Integrated, in a box with a screwed cover and a conduit entry

Photometric specifications

CCT: 4000–6000 K
CRI: Ra 80
Beam angle: 3° / 6° / 110°
Distribution: Downward, typical of a back-lit panel
Efficacy: 125–150 lm/W
Luminous flux: Measured · 1×4: 4,100 – 6,876 lm · 2×4: 7,019 – 9,819 lm, depending on step and color. Full table in the photometric data section

Physical, materials & mounting

Dimensions: 1×4 ft: 1,213 × 303 × 35 mm (47.75" × 11.92" × 1.4") · 2×4 ft: 1,213 × 603 × 35 mm (47.75" × 23.74" × 1.4")
Finish: White, powder coat
Materials: Polystyrene (PS) diffuser + aluminum frame + powder coat
Mounting: Recessed, replacing the existing ceiling fixture. Includes two alternative protective support options documented in the manual
Wiring: Unscrewable driver cover · conduit to the driver box · ×5 wire connectors included
Packaging: 6 pieces per box (1×4) · 4 pieces per box (2×4), no inner box

Protection & lifetime

IP rating: IP20
LED lifetime: 50,000 h · L70
Warranty: 5 years

Configurations / SKUs

SKU	Format	Wattage per step (W)	Selectable CCT	Factory default	Dimming
CL-PL10B-1X4-50W-3CCT	1 × 4 ft	30–50 W	4000–6000 K	5000 K · 40 W	0-10 V
CL-PL10B-2X4-70W-3CCT	2 × 4 ft	50–70 W	4000–6000 K	5000 K · 50 W	0-10 V

Swipe the table to see all columns →