Skip to content
Carden Lighting
Dark bronze LED canopy light with prismatic lens for a gas station canopy

Industrial

CL LBC 11

In stock

163 lumens per watt under the canopy

Power30 – 63 W
Efficacy30 – 163 lm/W
Flux4,450 – 9,400 lm depending on…
CCT4000 – 5000 K
CRIRa 70

Die-cast aluminium LED canopy with four 1/2" conduit entries that adapts on

Certifications

cULusDLC

Does your project require another standard? We build to your specification.

5-year warrantyResponse in under 24 h

Photometric data (IES/LDT) and datasheet available on request: we send them in under 24 h. Or write to us by email →

Design your space with the photometric studyBetaCheck that your project meets the norm: free, in minutes.

Your configuration

Updates with your selection in “Configure & add to quote”

Power
45 W
CCT
2700 K
Beam angle
120°
Diameter
20.8 m
Illuminance
60 lux
Industrial warehouseØ and illuminance calculated at 6 m

Configure & add to quote

Power

//W

Pick the SKU; the highlighted wattage is the default.

Light color

We manufacture any colour temperature. If the one your project needs isn't listed, ask for it and we'll build it.

Mounting

Other / extra requirement

Quantity

Where it's used
Gas stations and service canopies: its original application.Covered parking and basements: with photometry for parking garages.Loading docks and covered yards: mounts on an existing junction box.Building entrances and porticos: low profile, does not reduce headroom.Low-ceiling facilities: 4 m of usable height with the microwave sensor.Covered evacuation routes: with the 90-minute battery.
Featured benefits
  • Up to 163 lm/W: a high bay figure in a canopy
  • Adjusts on site without replacing equipment: three wattages and two color temperatures on the installed piece
  • DLC Premium, the level that unlocks incentives the basic level does not
  • Four 1/2" conduit entries: the conduit enters wherever is most convenient
  • 150° beam: covers the entire canopy with fewer pieces
  • Replaces 100 to 250 W HID
  • 0-10 V dimming down to off
  • cULus wet, from −40 to 45 °C, 5-year warranty
  • Microwave sensor and 90-minute battery available

Specifications

Electrical specifications

Input voltage
120-277 V AC (US) · 120-347 V AC (Canada) · 50/60 Hz
Wattage
30–63 W
Dimming
0-10 V continuous, from 100 % down to off
Current @ 277 V
0.12 · 0.18 · 0.25
Current @ 120 V
0.28 · 0.42 · 0.58
Motion sensor
Optional, microwave: factory installed only · maximum mounting height 13.12 ft (4 m) · requires a 12 V driver
Emergency
Optional: 8 W / 90 min backup battery, factory installed only

Photometric specifications

Output
4,450 – 9,400 lm depending on step and CCT
Efficacy
30–163 lm/W
CRI / Ra
Ra 70
CCT
4000–5000 K
Beam angle
7°
Equivalence
Replaces 100 to 250 W HID

Physical, materials & mounting

Format
Square canopy, low profile
Construction
Die-cast aluminum with four 1/2" NPS side conduit entries
Optics
Heat-resistant polycarbonate lens
Dimensions
9.53" × 9.53" × 3.39" (242 × 242 × 86 mm)
With emergency battery
15.9" long (404.3 mm)
Net weight
3.62 lb (1.64 kg) at all three steps
Mounting
Quick-mount plate for surface or junction box · pendant on a 3/4" NPS pipe (sold separately)
Finish
Dark bronze standard · white, black, silver, dark green and others on request
Packaging
6 pcs per box · box 24.02" × 10.94" × 11.18" · 29.76 lb gross
Container
2,904 pcs per 20GP · 7,992 pcs per 40HQ

Protection & lifetime

Location
cULus for wet locations
Ambient temperature
−40 °C to +45 °C (−40 °F to 113 °F)
Warranty
5 years

Configurations / SKUs

SKUSelectable wattagesOutput @ 4000 KOutput @ 5000 KEfficacy
CL-LBC11-63WS★30–63 W4,900 · 7,100 · 9,400 lm4,450 · 6,450 · 8,550 lm136–163 lm/W

Swipe the table to see all columns →

Similar products

Same family

Complete your project

Often specified together

CL FLS 10
CL FLS 10Industrial
CL HBU 10
CL HBU 10Industrial
CL EM 2
CL EM 2Emergency
CL WP 9
CL WP 9Outdoor