CL HBL 12

Name: CL HBL 12
Brand: Carden Lighting
SKU: CL-HBL12-4FT-300W-2CCT

In stock

2 ft and 4 ft Linear LED High Bay · Power and Color Selected on the Fixture

Power80 – 300 W

Flux12,800 – 47,400 lm depending on…

CCT4000 – 5000 K

CRIRa 80

IPIP20

CL HBL 12 is Carden Lighting's linear LED high bay in 2 ft and 4 ft formats, the long body that lines up with the rack aisle or the building bay. Every fixture carries three power steps and two color temperatures selected on the unit: when mounting height or area use changes, the fixture is recalibrated on site instead of replaced. Six platforms span 80 to 300 W with up to 47,400 lm per point at 148–172 lm/W. Triple voltage 120-277 V, 120-347 V and 277-480 V, 0-10 V dim-to-off, integrated sensor base, frosted diffuser as standard, optional polycarbonate lens and wire guard, optional 90-minute emergency battery, cULus damp location listing, DLC 6.0 Premium and a 5-year warranty.

Certifications

cULusULDLC

Does your project require another standard? We build to your specification.

Request a quote Request data sheet Request IES files

5-year warrantyResponse in under 24 h

Photometric data (IES/LDT) and datasheet available on request: we send them in under 24 h. Or write to us by email →

Design your space with the photometric studyBetaCheck that your project meets the norm: free, in minutes.

Your configuration

Updates with your selection in “Configure & add to quote”

Configure & add to quote

Power

Light color

We manufacture any colour temperature. If the one your project needs isn't listed, ask for it and we'll build it.

Mounting

Other / extra requirement

Quantity

Where it's used

Wide-bay industrial facilities and manufacturing plants: the 4 ft body spreads output lengthwise instead of concentrating it at one point, covering the bay width with fewer points and less contrast over the work line. The three steps let you tune the level by zone without changing models.Warehouses and distribution centers with aisles between racks: the linear format aligned with the aisle is the natural geometry of storage, so light reaches down between the shelves instead of staying up high. The step is adjusted when the layout changes, without replacing the fixture.High bay and mid bay areas (5 to 12 m ceilings); two formats and four power platforms cover 80 to 300 W within the same series, so a building with mixed heights is solved with a single product line.Gyms, indoor courts and indoor sports areas: the wire guard available for each format protects the fixture from ball impact, and the linear distribution reduces direct glare over the court.Workshops, maintenance areas and loading docks: the 2 ft format at 105 or 165 W fits spaces where a full high bay would be oversized, while keeping the same control and color temperature criteria as the rest of the building.Big-box retail, large-format stores and back rooms: 4000 K for the sales floor or 5000 K for the stockroom, with the same fixture; the DLC listing opens incentive programs on North American projects.HBL family (High Bay Linear): linear industrial high bay fixtures for industrial facilities, warehouses and high-ceiling spaces.CL HBL 12 introduces 2 ft and 4 ft formats to the family, which did not exist before: CL HBL 10 comes in 1.2 / 1.7 / 2.4 ft and CL HBL 8 measures 340 mm. It is the choice when the project calls for a long body aligned with the aisle or the building bay.Compared with CL HBL 10: the 4 ft, 300 W platform delivers 46,200 lm, practically the same output as CL-HBL10-4-270W (46,500 lm) at almost the same wattage; the real difference is the format (4 ft versus 1.7 ft) and nothing else: both series are DLC Premium, so the listing tier no longer separates them. Specify CL HBL 12 when the long-body geometry drives the decision.Compared with CL HBL 11: CL HBL 11 brings four wattage steps and up to 170 lm/W in short formats; CL HBL 12 brings the long 2 and 4 ft formats. They coexist in the same project.Series range: 80–300 W · up to 47,400 lm · 148–172 lm/W · cULus damp · DLC 6.0 Premium · 5-year warranty.NOM-025-STPS (lighting levels in workplaces): the three steps and two formats let you reach the level required by task and mounting height; the level is defined with a Carden photometric study.Location rating: damp location (cULus) and IP20, for indoor use.

Featured benefits

Adapts on site without replacing equipment; wattage and color temperature are adjusted on the installed fixture when the height, layout or use of the area changes.
The long 2 and 4 ft body spreads output along the aisle or building bay instead of concentrating it at one point: less glare and a more even light pattern.
Up to 47,400 lm per point in the 4 ft format, at 148–172 lm/W.
cULus for damp locations and DLC 6.0 Premium: the safety listing for the United States and Canada, and the DLC level that unlocks the highest incentive programs in North America.
Triple voltage: 120-277 V, 120-347 V and 277-480 V; the same series fits commercial and industrial panels without changing families.
Control-ready: 0-10 V dimming down to off and a sensor base built in as standard, with a Zhaga adapter, occupancy sensor and remote control available.
Wire guard per format: direct protection against ball impact in gyms and indoor courts, and against equipment at loading docks.
90-minute emergency backup available from the factory for evacuation routes inside the facility.

Specifications

Electrical specifications

Wattage: 80–300 W
Input voltage: 120-277 V AC (all platforms) · 277-480 V AC (165, 225 and 300 W platforms)
Frequency: 50/60 Hz
Driver: Integrated · continuous 0-10 V, dims from 100 % down to off · input current at 120 V: 0.74 A (80 W) · 0.97 (105) · 1.20 (130) · 1.53 (165) · 1.81 (195) · 2.08 (225) · 2.78 A (300 W)
Dimming: 0-10 V dimming down to off across the series
Voltage by market: 120-277 V and 277-480 V for the US · 120-347 V for Canada
Controls and sensors: 3-pin sensor base built in as standard; convertible to an audio-jack-type connector (labor cost applies). Compatible with a Zhaga receptacle adapter, PIR sensor and remote control (see accessories)
Emergency backup: Available as a factory option: 20 W / 90 min battery (105 to 225 W platforms) and 30 W / 90 min (300 W platform), with its own installation kit

Photometric specifications

Luminous flux: 12,800 – 47,400 lm depending on platform, step and CCT: all 36 measured values are in the table below
CCT: 4000–5000 K
CRI: Ra 80
Beam angle: 120°
The same 2 ft body covers 12,800 to 35,550 lm: and the 4 ft one from 20,950 to 47,400 lm without changing fixtures: the platform is chosen at purchase and the step at installation.
4000 K delivers 2 % to 4 % more output than 5000 K: Across the series. When the project does not require a specific color temperature, 4000 K delivers more lumens per watt.

Physical, materials & mounting

Dimensions: 2 ft: 590 × 320 × 75 mm (23.23 × 12.6 × 2.95 in) · 4 ft: 1,125 × 320 × 75 mm (44.29 × 12.6 × 2.95 in). Both formats share width and height; only the length changes
Housing: Heavy-gauge steel, rigid assembly designed not to twist or buckle. High-reflectance metal interior, all-in-one integral housing
Diffuser: Frosted diffuser as standard, spreading light evenly and without glare. A polycarbonate lens is also available as an accessory, in two sizes depending on the format: 1 piece per fixture
Hardware: 1.5 m steel cable suspension kit (2 pieces) included as standard. Surface and conduit hardware are sold separately. The housing has knockouts for MC cable or 3/4 in conduit entry
Finish / color: White, the series' standard finish
Mounting: Suspended by steel cable (included) · chain · surface (separate kit) · 3/4 in conduit (separate). The four modes are documented step by step in the installation guide
Mechanical protection: Wire guard available per format (2 ft and 4 ft) for areas at risk of ball or equipment impact
Packaging: 2 pieces per box · 2 ft box: 25.20 × 7.68 × 14.96 in · 4 ft box: 46.26 × 7.68 × 14.96 in
Container load: 20GP: 986 pcs (2 ft) / 534 pcs (4 ft) · 40HQ: 2,712 pcs (2 ft) / 1,470 pcs (4 ft)
Direct replacement: Replaces 4- to 8-lamp F32T8 / F54T5 high-output fluorescent and 250 to 1,000 W metal halide

Protection & lifetime

IP rating: IP20
Operating temperature: −25 °C to 45 °C (−13 °F to 113 °F)
LED lifetime: 102,000 h · L70
Warranty: 5 years

Configurations / SKUs

SKU	Format	Wattage per step (W)	Output at the top step (4000 K / 5000 K)	Efficacy	CCT	Voltage	Dimming
CL-HBL12-2FT-105W-2CCT	2 ft	80–105 W	16,600 / 16,000 lm	152–165 lm/W	4000–5000 K	120-277 · 120-347 · 277-480 V	0-10 V down to off
CL-HBL12-2FT-165W-2CCT	2 ft	130–165 W	25,450 / 24,450 lm	148–161 lm/W	4000–5000 K	120-277 · 120-347 · 277-480 V	0-10 V down to off
CL-HBL12-2FT-225W-2CCT	2 ft	175–225 W	35,550 / 34,900 lm	155–167 lm/W	4000–5000 K	120-277 · 120-347 · 277-480 V	0-10 V down to off
CL-HBL12-4FT-165W-2CCT	4 ft	130–165 W	26,600 / 25,750 lm	156–168 lm/W	4000–5000 K	120-277 · 120-347 · 277-480 V	0-10 V down to off
CL-HBL12-4FT-225W-2CCT	4 ft	175–225 W	37,150 / 36,450 lm	162–172 lm/W	4000–5000 K	120-277 · 120-347 · 277-480 V	0-10 V down to off
CL-HBL12-4FT-300W-2CCT★	4 ft	230–300 W	47,400 / 46,200 lm	154–165 lm/W	4000–5000 K	120-277 · 120-347 · 277-480 V	0-10 V down to off

Swipe the table to see all columns →